Product Sections
Main Pages
|
Precision Bass
Guitar Parts Shop |
SEYMOUR DUNCAN PICKUPS |
Bass Pickups |
Precision Bass
|
Seymour Duncan APB-1 Pro Active for P-Bass
Modern-voiced, active replacement pickup for P-Bass®. Great for pop, blues, classic rock and heavy rock.
Compared to the Lightnin' Rods, the tone is more modern with sharper attack and more punch in the bass response. But unlike other active bass pickups, you don't get any brittleness. Includes logo covers.
Available as a split-coil active pickup. Battery life is approximately 2,000 continuous hours. Often used together with STC-2 or -3 Tone Circuits for optimal tonal control. Includes mounting and wiring hardware. Includes logo covers.
For warmer toned ash, alder or basswood body instruments. Works especially well with rosewood fingerboards.
Players: Tere Bertke / Blackhawk, Carol Kaye / session legend, Tim Gaines / Stryper, Frank Bello / Anthrax, Blasko / Rob Zombie
|
| |
|
Seymour Duncan SCPB-2 Hot for Single Coil P-Bass®
Application
Hot single-coil. Recommended for pop, blues, classic rock and heavy rock.
Description
A high-output take on the Vintage. In this case, we increase the coil windings for higher output, more punch, and a thicker bottom-end than the Vintage. Includes Basslines logo.
Complete Setup
Often used together with STC-3M3 or -3M4 Tone Circuits for optimal tonal control.
[High Output] [Pro Shop] [Single Coil]
|
|
|
Seymour Duncan SPB-3 Quarter Pounder for Precision Bass
Seymour Duncan's most popular Basslines pickup. High output, versatile, pickup. Recommended for blues, classic rock, punk, heavy rock, classic metal and nu-metal.
The quarter-inch diameter pole pieces expand the magnetic field and extend the frequency ranges for fat, full, punchy sound with tremendous mid-range presence and maximum output. Though often used for heavy rock tones, this pickup gives amazing tonal versatility to a single pickup instrument making this the most popular Basslines pickup. Includes logo covers. Often used together with STC-3M3 and -3M4 Tone Circuits for optimal tonal control.
For warmer toned ash, alder or basswood body instruments. Works especially well with rosewood fingerboards.
Players:
Mark Hoppus / Blink 182, Ian Grushka / New Found Glory, Anthony Celestino / Box Car Racer, Jay Bentley / Bad Religion, Melissa auf der Maur / Smashing Pumpkins & Hole, Steve Harris / Iron Maiden
|
|
|
|
Seymour Duncan SCPB-1 Vintage for Single Coil P-Bass®
SCPB-1 -- When Leo Fender brought out the Precision Bass® in the early '50s, the pickup looked much like the Telecaster® guitar pickup, with black fiberboard flatwork and black string wrapped around the coil. The
SCPB-1 looks just like the original vintage pickup, down to the smallest detail and gives you the same bright sound. Pickup cover included
|
|
|
Seymour Duncan Antiquity pickup for precision bass® (twin coil) -11044-11-12-13
11044-13 pickup for single coil precision bass®
This single coil pickup is a replica of the ones found in the early "Telecaster®" single coil P-Bass®. It has four alnico magnets for the traditional sound. Each coil is wound with plain enamel magnet wire and protected with wax coated string. Hookup wire is the classic "push back" cloth braid wire.
11044-11 pickup for precision bass® (twin coil)
The two bobbins are reverse wound and reverse polarity to make the pickup humbucking. The pickups are hand fabricated and wound using traditional techniques and use classic "push back" cloth braid hookup wire. Each pickup comes with aged black covers, schematics and mounting screws.
11044-12 pickup for precision bass®, raised "A" (twin coil)
Like the originals, Seymour uses .625" magnets on the "A" string for better string balance. The two bobbins are reverse wound, reverse polarity to make the pickup humbucking. The pickups are hand fabricated and wound using traditional techniques and use classic "push back" cloth braid hookup wire. Each pickup comes with black aged covers, schematics and mounting screws.
|
|
|
Seymour Duncan Precision Bass Pickup:SPB-1
SPB-1 -- In 1957, Leo Fender changed the Precision Bass® guitar pickup to a two coil system wired together to eliminate interference hum. He also used two pole pieces for each string to capture the greater string excursion of the bass guitar. This pickup delivers the distinctive smooth output, increased treble and full midrange of the original.
|
|
|
|
Seymour Duncan Hot for Precision Bass Pickup:SPB-2
SPB-2 -- Just like the SPB-1, but with extra windings on the coils for musicians who want more output and greater low end response for a fuller sound. The two coils are wired in a humbucking mode to eliminate interference hum. Pickup cover included
|
|
Guitar Parts Shop |
SEYMOUR DUNCAN PICKUPS |
Bass Pickups |
Precision Bass
 |
|
