Designed for basses, the VMC (Variable-Mid-Control) is perfect for dialing in just the tone you want. Using the cut to reduce the mids gives you that classic full bottom end with a snappy high end. By boosting the mids you can get a fat and boomy low end.
Package Includes: Output jack, battery clip set, and knobs.
|
The Pi2 is an active phase reversal circuit mounted on a mini-toggle switch, and is used in guitars with two or more EMG Pickups. Wired in series with one of the pickups, The Pi2 produces true "out of phase" sound by reversing the phase of the pickup. The active method of phase reversing is superior because it maintains the quietness of an EMG equipped instrument. It requires the same amount of space as a conventional phase switch, and only four solder connections are necessary. Along with the Pi2, mounting hardware and complete instructions are included to make installation easy.
Package Includes: Output jack and battery clip set.
|
The RPC is a variable active control that boosts the high frequency response up to 6 dB at 4000 Hz, while simultaneously reducing low frequency response. Its potentiometer controlled circuitry allows you to sweep from natural sound to accentuated highs typical of single-coil pickups. Like the EMG-SPC, it can be wired to one pickup or at the output of the guitar.
Package Includes: Output jack and battery clip set.
|
For flexibility in tone at your fingertips there is no better choice than the EXG Guitar Expander. The frequency response of the EXG is similar to normal guitar amp equalization. The lows and highs are boosted while the midrange is dipped out. The EXG is great for creating a fuller tone that doesn't get muddy, while keeping it clean and clear, letting your guitar stand out in the mix.
Package Includes: Output jack and battery clip set.
|
The EMG-EXB is an unconventional equalization control for bass that increases the low and high frequency regions while reducing the midrange simultaneously to provide the gain and punch that bass players want. Slap players will especially appreciate its superior clarity and percussive quality. Similar in design and construction to the EMG-EXG, this unit is compact and will fit into most EMG equipped instrument control compartments without any modification. Instruction and wiring diagrams are included for easy installation.
Package Includes: Output jack and battery clip set.
|
The PA2 is a straight booster preamplifier mounted on a minitoggle switch. Perfect if you want to just plain overdrive the input of your amp for distortion. It has a trim pot so you can preset the amount of boost up to an additional 20 dB. The PA2 will also work with passive pickups.
Package Includes: Output jack and battery clip set.
|
The SPC or "Strat Presence Control" is often called the fat control. The original intent of the SPC was to turn the tone of a single-coil pickup into a dual-coil. This is accomplished by boosting the gain in a broad mid-band fashion and reducing the highs. The result is a fatter, louder tone from any single coil pickup, but you can also use it on a humbucking to give you a high output, really fat tone that's great for slide guitar.
Package Includes: Output jack and battery clip set.
|
The AB (Afterburner) is a push/pull booster with up to 20dB of preset variable gain, perfect for having fun with clean overdrive and distortion. It works with both active and passive pickups, uses rail-to-rail technology, and is easy to install. If you're a lead player, the Afterburner is for you.
Package Includes: Output jack and battery clip set.
|
