Product Sections
Main Pages
|
Electronics
Guitar Parts Shop |
FENDER |
Electronics
|
|
250k No Load Potentiometer
The no load is used on some USA Strats, Teles and Fender basses. Wired like a standard tone control.. From settings 1-9 it works like a standard tone then clicks out out of the circuit at 10 (full clockwise/ bright setting) removing both the pot and capacitor from the circuit. This eliminates the path to ground that exists with standard pots even in the full treble position. By eliminating the path to ground thru the pot, the only load on the pickup is the volume pot. So if 250K pots are used, the load is reduced from 125K to 250K and if 500K pots are used, the load is reduced from 250K to 500K (high resistance = low load) The reduced load allows more power output from the pickup and reduces the amount of high frequencies that bleed off to ground. This gives a noticeable increase in brightness and output in the full treble setting. The no load pot can be used in place of any standard tone control on any guitar or bass. Available with solid or split, knurled shaft With nut, lock & dress washer. Perfect for a vintage replacement or an upgrade for other instruments.
|
|
|
Fender Mid-Boost Kit
The unit used on the Clapton Strat. Mid-boost turns your Strat into a Les Paul!!
Complete w/ PC board, TBX tone pot, 250K pot, 50K pot, battery connection & 1/4" stereo jack.
|
| |
Guitar Parts Shop |
FENDER |
Electronics
 |
|
