Guitar Parts Shop
 
 

Product Sections


Main Pages



Bass Preamps

Guitar Parts Shop |  GUITAR & BASS ELECTRONICS |  Bass Preamps

EMG-BTC 2-Band Control

The BTC Control features a bass and treble equalizer on a concentric (stacked) pot. It takes up very little space and will work with any pickup, active or passive. It comes complete with knobs (including 2 extra volume knobs). BTC Controls and Systems are the most widely used bass EQ Systems in the world. Approximately 12db of cut and boost are available for bass and treble and all controls are center detented to assure quick return to normal tone settings. A dual-dip switch is mounted to the PC Board that lets you program the high end frequency response four different ways so you can choose the sound that's right for you. These systems use the latest in surface mount technology, are extremely quiet, and require very little current from a 9 Volt battery.

Package Includes: 2 concentric knobs, 2 control knobs, output jack, and battery clip set.

EMG-BTS 2-Band Control

The BTS Control is essentially the same as the BTC Control but instead of a concentric pot, the controls are separate. The BTS Control will also work with active or passive pickups. Both pots are center detented, and 4 knobs are included.

Package Includes: 2 control knobs, 2 extra knobs, output jack, and battery clip set.

EMG-BTC 2-Band System

For EMG pickups only, the BTC System features a pre-wired balance control (blend) and master volume with the bass and treble on a concentric pot. BTC Controls and Systems are the most widely used bass EQ Systems in the world. Approximately 12db of cut and boost are available for bass and treble and all controls are center detented to assure quick return to normal tone settings. A dual-dip switch is mounted to the PC Board that lets you program the high end frequency response four different ways so you can choose the sound that's right for you. These systems use the latest in surface mount technology, are extremely quiet, and require very little current from a 9 Volt battery.

Package Includes: 2 concentric knobs and 2 knobs for balance/master volume.

EMG-BTS 2-Band System

For EMG pickups only, the BTS System features a pre-wired balance control (blend) and master volume with the bass and treble on separate pots.

Package Includes: 4 control knobs.

EMG-BQC 3-Band Control

The BQC Control features a bass and treble equalizer on a concentric (stacked) pot along with the concentric (stacked) mid-control. It takes up very little space and will work with any pickup, active or passive. It comes complete with knobs including 2 extra volume knobs.

Package Includes: 2 concentric knobs sets, 2 extra knobs, output jack, and battery clip set.

EMG-BQS 3-Band Control

The BQS Control is essentially the same as the BQC Control but the bass and treble controls are separate. The mid-control is concentric (stacked). The BQS Control will also work with active or passive pickups. The pots are center detented, and 2 extra volume knobs are included.

Package Includes: All knobs included and 2 extra control knobs for additional uses.

EMG BQC 3-Band System


For EMG pickups only, the BQC System features a pre-wired balance control (blend) and master volume with both the bass and treble on a concentric pot as well as the mid-control. All the EQ controls and balance control feature center detents.

Package Includes: All knobs included.

EMG-BQS 3-Band System

For EMG pickups only, this system features a pre-wired balance control (blend) and master volume with separate bass and treble pots along with the concentric mid-control (stacked). All the EQ controls and balance control feature center detents.

Package Includes: All knobs included.

EMG-B30EQ

The B30 equalizer was designed for contouring bass, mid and treble frequencies of bass guitar. It features single-pole filters for broadband equalization of 6db per octave. Often the broader single-pole filters are preferred for musical instruments because they are less selective, easier on the ear and sound more “musical”. The B30EQ has a center detent for easy reset to “flat” response, has a high input impedance, and can be used with active or passive pickups. Bass, Mid and Treble controls are spaced 1.25 inches (31.75mm) on center. Split Shaft pots are used throughout.

CHECK FIT SUITABILITY BEFORE ORDERING

EMG-B64EQ

The B64 Equalizer was designed for contouring bass, mid and treble frequencies of bass guitar. Unlike the B30EQ, it has a tighter filter bandwidth giving a more pronounced effect from each control. The mid-cut of the B64 is perfect for “funk” with its mid-range centered at a lower frequency. Both Bass and Treble controls on the B64 are more selective and don’t creep into the mid-range as much as the B30. This control also has center detent for easy reset to “flat” response, a high input impedance, and it can be used with active or passive pickups. Bass, Mid and Treble controls are spaced 1.25 inches (31.75mm) on center. Split Shaft pots are used throughout.

CHECK FIT SUITABILITY BEFORE ORDERING

Seymour Duncan STC-3M3 & STC-3M4 for music man®


On board Tone Circuits for adding tremendous tonal versatility. Enables the player to add to subtract EQ at center frequencies voiced specifically for electric bass. They feature low noise, low distortion and high headroom. Useful for all musical styles and genres.

Three bands of active EQ, plus the proprietary Slap Switch. The lows are deep, clear, and tight. The mids range from ultra-smooth to punchy and all points in between. The treble control can produce a very wide, very usable response that is brilliant, yet smooth without any brittleness. Pulling up on the volume knob engages the proprietary Slap Switch, a special EQ contour made just for slap-style playing.

Use together with Basslines' replacement pickup for Music Man bass. Includes all necessary mounting hardware: high-quality potentiometers on pre-wired harness; battery clip; stereo jack; and black anodized, knurled, dome-style knobs.

For Music Man® StingRay® basses and other basses with a single passive pickup. Will not work with 3-coil pickup.

Available in three- or four-knob versions. Three-knob has: (1) volume / slap, (2) mid-range, and (3) stacked-concentric bass & treble. Four-knob has: (1) volume / slap, (2) bass, (3) mid-range, and (4) treble.
Special harness options available - contact your Basslines dealer or Basslines Customer Service for details. Can use 18 volts for increased headroom

Seymour Duncan STC-2 & STC-3/2- & 3-Band tone circuits™ for Bass Guitar


On board Tone Circuits add tremendous tonal versatility. Enables the player to add to subtract EQ at center frequencies voiced specifically for electric bass. They feature low noise, low distortion and high headroom. Useful for all musical styles and genres.

Two or three bands of active EQ, master volume, blend, plus the proprietary Slap Switch. The lows are deep, clear, and tight. The mids range from ultra-smooth to punchy and all points in between. The treble control can produce a very wide, very usable response that is brilliant, yet smooth without any brittleness. Pulling up on the volume knob engages the proprietary Slap Switch, a special EQ contour made just for slap-style playing.

Includes all necessary mounting hardware: high-quality potentiometers on pre-wired harness; battery clip; stereo jack; and black anodized, knurled, dome-style knobs.

For nearly all dual pickup basses.

3-band adds a dedicated mid-range control. Versions available for use with active or passive pickups. Specify when ordering. Special harness options available - contact us for details. Can use 18 volts for increased headroom.

Guitar Parts Shop |  GUITAR & BASS ELECTRONICS |  Bass Preamps