|
Gotoh Vintage Kluson Style 3-a-side Tuners (AR-SD90 SLN)
These are high quality replicas of the 'single-ring' Kluson machine heads fitted to vintage Gibsons in the 50s and early 60s, before Klusons went to 'double-rings'. The colour of the knobs is more authentic (less green!) than the Schaller equivalents and they are a direct fit requiring a 11/32" (9mm) mounting hole rather than the 3/8" (10mm) mounting hole required by the Schaller and Grover equivalents. Set of 6.
|
|
|
|
Gotoh Vintage Kluson Style 3-a-side Locking Tuners (AR-SD90 MG SLN)
These are high quality replicas of the 'single-ring' Kluson machine heads fitted to vintage Gibsons in the 50s and early 60s, before Klusons went to 'double-rings'. The colour of the knobs is more authentic (less green!) than the Schaller equivalents and they are a direct fit requiring a 11/32" (9mm) mounting hole rather than the 3/8" (10mm) mounting hole required by the Schaller and Grover equivalents. Set of 6.
|
|
|
Gotoh 3-on-a-plate Nickel tuners
Reproductions of the Kluson tuners fitted to Gibson's less expensive guitars in the late 50s and early 60s, eg Les Paul Special/Junior, SG Special/Junior, ES-330TD. Two plates, and included bushes fit 11/32" (9mm) mounting hole. 1.375" (35mm) post centres.
|
|
|
Grover 3-a-side Rotomatics
Grover Rotomatics were fitted as original equipment to Gibson's high-end guitars like the SG Custom, ES-355 and Les Paul Custom in the late 50s and early 60s. They continue to be fitted to high quality guitars like the Gibson Les Paul Jimmy Page Signature model, today. Guitarists like Duane Allman and Jimmy Page fitted Grovers to their original Les Paul Standards to overcome the tuning problems presented by the Klusons of the time that were fitted as original equipment.
Mounting hole is 3/8" (10mm). Set of 6.
|
|
